How do I log into my telecom router?

How do I log into my telecom router?

Telecom Router Login Guide

1. Open your internet browser (e.g. Chrome, Firefox, Opera or Internet Explorer)
2. The default username for your Telecom router is Telecom. The default password is Telecom.

How do I login as administrator on Internet?

Do this by typing the router's IP address (in the format http://192.168.1.1) in the browser's address bar. Enter the administrative login information—username and password—to authenticate and access the admin settings.

How can I change my WIFI password telecom?

Abhishek Jaguessar Computer Palace

1. open your browser.
2. type 192.168.100.1 in your Browser.
3. Login Account: telecomadmin Password: admintelecom.
4. once login go to WLAN tab.
5. changed the WPA PreSharedKey.
6. Finally Click Apply and Your wifi password has changed.

What is the router username and password?

#1) The default username and password can be obtained from the router manual which comes with the router when you first purchase and install it. #2) Generally, for most of the routers, the default username and password is “admin” and “admin”. However, these credentials may vary depending upon the maker of the router.

How do I block someone from using my WiFi?

To set up access control:

1. Launch a web browser from a computer or mobile device that is connected to your router's network.
2. Enter the router user name and password. ...
3. Select ADVANCED > Security > Access Control.
4. Select the Turn on Access Control check box.

How can I change WiFi password?

How to Change Your WiFi Name and Password

1. Open a web browser. ...
2. Then type your router's IP address into the search bar and press the Enter key. ...
3. Next, enter your router's username and password and click Sign In. ...
4. Then click Wireless. ...
5. Next, change your new WiFi name and/or password. ...
6. Finally, click Apply or Save.

How do I find my router password using CMD?

1. Type and search [Command Prompt] in the Windows search bar①, then click [Open]②.
2. In the Command Prompt window, type the command [Netsh wlan show profile name=”Wi-F name” key=clear]③, and then press Enter key. ...
3. You can find the Wi-Fi password in the [Key Content] field in the Security settings category④.

What is router admin panel?

1.1. 192.168. 1.1 is a local IP address that is used to access the admin panel. 192.168. l.l is set by routers and modem company as the default gateway to access the Admin Panel of the router from where you can change default settings of your router including LAN, WLAN, Proxy, DSL, and different settings.

What does the IP address 192.168.1.2 do?

• 192.168.1.2 IP Address is used as a default gateway IP address by Zyxel, Fortinet, Rosewill and EnGenius routers. Connect your computer to the LAN port of the Zyxel router. The default IP address of the yxel router in access point mode is "192.168.1.2".

Is 192.168.1.21 public or private?

• IP Address 192.168.1.21 is a private IP address. Private IP addresses are used inside a local area network (LAN) and are not visible on the internet. Private IP addresses are defined in RFC 1918 (IPv4) and RFC 4193 (IPv6).

Is 192.168.1.21 a private IP address?

• Important Note: 192.168.1.21 is a private IP address, and is only used in internal network environments. Any abusive activity you see coming from an internal IP is either coming from within your network itself, or is the result of an error or misconfiguration.

How to set up a router?

• Log into your router.
• To acquire the IP address the computer or device is currently using, click Attached Devices under the Maintenance menu. Note the IP address (192.168.1.
• Under Advanced, click LAN Setup.
• Under Address Reservation, click Add.
• Type in the IP address (ex: 192.168.1.x), the MAC address of the device, and a name describing the device in the spaces provided.
• Click Add to save the information.